Status Lights and Sounds | VOOL Help Center

The VOOL Charger is intuitively designed to provide visual feedback during the charging process to assist you in understanding the status of your charging session.

The status lights are shown when:

• The charger is connected to a power source.

• The charger is ready to charge and the cable is properly connected.

• The charger has started charging.

• The charger has completed the charging.

• An error or issue occurred in the charging process.

• Smart charging has been initiated.

The status of the charger	Status light	Status sound
The EVSE is connected to the power and ready to use This light indicates that the EVSE is connected to a power source and is ready to charge	White	One beep
The cable is properly connected & ready to charge.	Blue	Two beeps
Start the charging This light indicates that the charging process has started and that EV is receiving power from EVSE	Green fast pulsing	N/A
Charging	Green pulsing slowly	N/A
End of charging This light indicates that the battery is fully charged & the charging session is complete.	Green solid	N/A
Fault or error This light will indicate that there is an issue with the charging process.	Red	N/A
Software update Do not use the EVSE or turn it off!	Blue pulsing	N/A

Quick Tips to Check When Charging Doesn't Start