Before you start installing the VOOL charger, please make sure that you have all the necessary tools and parts in place. Here is what's included in the box that you received.
​
1. Front panel with decorative plate
​
2. Charge Controller
​
3. Charger case
​
4. 6.5m cable with pre-installed cable stopper and green socket and Type-2 plug
​
5. Screws, dowels and bolts for installation on wood, concrete wall or metal post
​
6. Grommets for all cable entries
​
7. Charger casing opening tool (also a handy bottle opener)
​
8. Programmable VOOL RFID tag

Tools required for full installation:
​
• Pen
​
• Wire cutter
​
• Voltmeter or digital multimeter
​
• Flathead screwdriver (for the electrical sockets)
​
• T20 Torx driver (for the cable clamp)
​
• PH2 screwdriver (for mounting on concrete and wood)
​
• Size 3 Hex driver (for the mounting post)
​
• Ferrules (the diameter of the ferrule depends on the diameter of the power wiring and the construction)
​
• Level
​
• Power drill