The VOOL Pro Pole (product code VPROPOLE) is a charger pole with an internal compartment and three DIN rails for circuit breakers, meters and other electrical equipment. It takes up to two VOOL chargers.
Installation
Securely anchor the Pro Pole to the ground using M12 bolts and washers of appropriate grade.
Ensure the pedestal is installed at a true level.
Tighten all fasteners to the specified torque value, in accordance with the recommended torque specifications.
The Pro Pole is intended for installation directly onto a solid surface (e.g. concrete) or for mounting on a suitable pedestal.
The holes for the VOOL charger case and the cable hook are already made in the pole — no drilling is necessary.
The Pro Pole is equipped with three DIN rails for mounting the necessary electrical equipment. The equipment compartment is closed with a removable front cover.
It is the responsibility of the installer to ensure that the product installation complies with all relevant national standards and regulatory requirements applicable to the installation location.
Dimensions
Overall height: 1497 mm
Pole section: 200 × 100 mm
Base plate: 230 × 200 mm
Equipment compartment: 154 mm wide × 574 mm high, starting 600 mm above the base
DIN rails: three, spaced 150 mm apart
General information
Ingress protection: IP54
Impact protection: IK10
Material: powder-coated marine-grade aluminium