The holes for the charger case have already been made in the post - no drilling is necessary.
The mounting post can be bolted to a solid surface or rooted in the ground. Select where you would like to install the charger and choose a suitable location for the post. The post can be purchased with the VOOL Charger. It is possible to fasten the charger to posts from other manufacturers, but keep in mind that it must be capable of supporting the weight of the charger and accessories (4 kg).
For cable installation cut a hole into the cover panel and use the supplied grommet for the power supply cable. Optionally, use the smaller holes with smaller grommets for the Ethernet cable penetrations.
For mounting, we recommend using DIN 7991/ISO 10642 steel 010.9 zinc-plated SCR-ISO10642-010.9-HS8-(A2K)-M12X55 screws.
Wall installation.
Choose a suitable location to install the charger on the wall. The wall should be stable, flat, and suitable to support the weight of the charger.
